Fluted pillar candle making machine

 

Fluted pillar candle making machine is used to make the fluted pillar candle and fluted taper candle.

 

 The candle production process follows steps:

1. Melt the solid wax (paraffin, palm wax or soy wax etc.) into liquid state

2. Mix with wax pigment (optional to make colored candle)

3. Turn on the water pump to feed cool water into the candle machine

4. Put the candle wick through the candle moulds on the machine

5. Pour the liquid wax into the candle moulds

6. Scrap out the surplus wax above the candle moulds after wax get solidified.

7. Extrude out the candles from the moulds

8. Cut off the wick thread from the top of candle

9. Pack the candle into plastic bags or wrapped with paper

10. Put the wrapped candle into carton and carry to warehouse

11. Prepare for next cycle of production

 

The pouring type candle making machine has fixed moulds, each machine can make one diameter of candle, the candle length can be adjusted within 10mm. The popular candle size and production rate is listed below:

Any custom candle size is available if you provide us before production.

The candle factory should have at least five areas. Candle production shop, cooling water tower area, wax melting area, raw material warehouse, finish product warehouse.

 

The candle production line has the following main units:

Standard water boiler

Heat transfer liquid Wax melter

Wax flowing pipelines

Water tower

Water pump

Water pipelines

Pouring type candle making machine

Candle packing machine